Dallara F312
Antonio Giovinazzi at the 2014 Hockenheim FIA Formula 3 European Championship round | |
Category | Formula Three |
---|---|
Constructor | Dallara |
Designer(s) | Luca Pignacca Andrea Toso Jos Claes Ferdinando Concari |
Predecessor | Dallara F308 |
Successor | Dallara F317 |
Technical specifications[1] | |
Chassis | Carbon fibre monocoque |
Suspension (front) | Pushrod with twin-damper system and torsion-bar springs |
Suspension (rear) | Pushrod with twin-damper system and coils springs |
Length | 4,351 mm (171 in) |
Width | 1,845 mm (73 in) including tyres |
Height | 945 mm (37 in) |
Wheelbase | 2,800 mm (110 in) |
Engine | Various manufacturers (Mercedes-Benz F3 414, Volkswagen Spiess 0XY, Tomei-ThreeBond TB14F3, TOM's Toyota TAZ31, Mugen-Honda MF204D and Toda TR-F301) 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout |
Transmission | 6-speed semi-automatic sequential gearbox |
Power | 240 hp (179 kW) |
Weight | 580 kg (1,279 lb) including driver |
Fuel | Various unleaded control fuel |
Lubricants | Various |
Brakes | Carbon brake discs, 6-piston calipers and pads |
Tyres | Various OZ 9”front & 10.5”rear |
Competition history | |
Debut | 2012 |
The Dallara F312 is an open-wheel racing car developed by Italian manufacturer Dallara for use in all Formula Three categories. The car has proved to be one of the most popular Formula 3 Chassis ever, with over 53 of the original type having been produced.[2] Even after its successor the Dallara F317 was introduced, the F312 remained widely used, in championships such as the Euroformula Open Championship and the Japanese Formula 3 Championship.
Development history
The Dallara F312 was designed to meet the new for 2012 FIA Formula 3 regulations, which were much more restrictive compared to previous Formula 3 regulations, and led to reduced downforce levels.[3] Compared to the previous generation Dallara F308, the 312 features a higher monocoque and a lower nose-section than the outgoing model, with the front dampers and springs being placed inside the tub, a first for a Dallara F3 car, alongside a revised aerodynamic package. The car was unveiled at the Masters of Formula 3 event on the 20th of October 2011 at Circuit Zandvoort, in the Netherlands.[4]
References
- ^ "Dallara F312" (PDF). euroformulaopen.net.
- ^ "formel 3 guide - Dallara". www.formel3guide.com. Retrieved 2019-04-20.
- ^ Mills, Sam Tremayne and Peter (18 August 2011). "New Dallara F312 is set to feature major changes from predecessor". Autosport.com. Retrieved 2019-04-20.
- ^ O'Leary, Jamie. "Dallara unveils revised F3 chassis for 2012". Autosport.com. Retrieved 2019-04-20.
- v
- t
- e
- Founder
- Giampaolo Dallara
- Formula One cars
- 3087
- F188
- F189
- F190
- F191
- F192
- RA099
- F110
- VF-16
- VF-17
- VF-18
- VF-19
- VF-20
- VF-21
- VF-22
- VF-23
- VF-24
- IndyCar Series cars
- IR-7
- IR-00
- IR-03/IR-05
- DW12
- IR-27
- Super Formula cars
- SF14
- SF19
- SF23
- GP2 Series (2005–2016) later FIA Formula 2 Championship (2017–present) cars
- GP2/05
- GP2/08
- GP2/11
- F2 2018
- F2 2024
- GP3 Series (2010–2018) later FIA Formula 3 Championship (2019–present) cars
- GP3/10
- GP3/13
- GP3/16
- F3 2019
- F3 2025
- Formula Three cars
- Emiliani 380
- 381
- 382
- 383
- 384
- F385
- F386
- F387
- F388
- F389
- F390
- F391
- F392
- F393
- F394
- F395
- F396
- F397
- F398
- F399
- F300
- F301
- F302
- F303
- F304
- F305
- F306
- F307
- F308
- F309
- F310
- F311
- F312
- F313
- F314
- F315
- F316
- F317
- 320
- Formula Renault 3.5 (2005–2015) later Formula V8 3.5 (2016–2017) cars
- T05
- T08
- T12
- Autonomous racing
- AV-21
- AV-24
- EAV24
- List
- Dallara cars