Baker Street Mill, Orsett

Smock mill in Essex, England

51°30′22″N 0°21′11″E / 51.506°N 0.353°E / 51.506; 0.353Operator(s)PrivateYear builtLate 18th centuryInformationPurposeCorn millTypeSmock millStoreysThree-storey smockBase storeysTwo-storey baseSmock sidesEight-sided smockNo. of sailsFour sailsType of sailsDouble Patent SailsWindshaftCast ironWindingFantailFantail bladesEight bladesAuxiliary powerSteam mill adjoiningNo. of pairs of millstonesThree pairs

Baker Street Mill is a grade II listed^[1] smock mill at Baker Street, Orsett, Essex, England which has been part adapted to residential use on its lower two floors only.

History

Baker Street Mill is said to have been built in 1765, although a date of 1762 is recorded in the mill. The earliest firm reference for the mill is 1796, this from a sale notice in 1808. It is likely that the mill was raised a storey between 1762 and 1814. The mill was working by wind until 1914. A steam mill was built near the mill towards the end of its working life, a new boiler being supplied in 1906.^[2]

The mill gradually became more and more derelict, losing two sails in 1926 to a lightning strike. The windmill and steam mill were converted to residential accommodation in 1982.^[2]

Description

Baker Street Mill is a three-storey smock mill on a two-storey brick base, with a stage at first-floor level. The mill had four double patent sails, and the Kentish-style cap is winded by a fantail.^[2]

Mill

Baker Street Mill has an octagonal two-storey brick base, the walls of which are almost 3 feet (914 mm) thick at ground level. The base is 20 feet 4 inches (6.20 m) across the flats and 18 feet 6 inches (5.64 m) high, the brickwork at the top of the base is about 18 inches (457 mm) thick.^[3]

The smock is 21 feet 8 inches (6.60 m) from sill to curb. The mill is 11 feet (3.35 m) diameter at the curb, the cant posts being about 10 inches (254 mm) square. The stage is at first-floor level, 8 feet 6 inches (2.59 m) above the ground.^[3]

The cap is of Kentish style, with blisters for the brake wheel, with an overall height of some 8 feet (2.44 m), giving the mill an overall height of about 46 feet 6 inches (14.17 m). Winding is by an eight-bladed fantail, although originally the mill was winded by hand.^[3]

Sails and windshaft

Baker Street Mill has a cast-iron windshaft and four double patent sails. The windshaft was originally a wooden one. The last working sails were an odd pair, the outer pair having eight bays of four shutters and one bay of three, the inner pair having eleven bays of three shutters.^[3]

Machinery

The wooden brake wheel is of clasp arm construction, 8 feet (2.44 m) diameter. It has been converted from compass arm construction. The rim is of elm.^[3] The Wallower is wooden, as is the upright shaft. The compass arm great spur wheel is 7 feet (2.13 m) diameter, and has six arms. The mill originally worked two pairs of overdrift millstones, with a third pair being added later.^[3]

Fantail

Baker Street Mill was winded by an eight-bladed fantail, replacing the original hand winding by means of a Y wheel and chain, which was retained as a standby method of winding the mill.

v t e Thurrock
Traditional parishes in Thurrock	Aveley Bulphan Chadwell St Mary Corringham East Tilbury Fobbing Grays Horndon-on-the-Hill Langdon Hills Little Thurrock Mucking Orsett South Ockendon Stanford-le-Hope Stifford West Thurrock West Tilbury
Other places in Thurrock	Baker Street Belhus Biggin Bill Meroy Creek Chafford Gorges Nature Park Chafford Hundred Globe Pit Hangman's Wood High House, Purfleet Linford Wood Lower Horse Mardyke (river) Orsett Heath Purfleet Rainham Marshes Nature Reserve Shell Haven Terrel's Heath Thurrock Thameside Nature Park Tilbury Town
Historic buildings in Thurrock	Baker Street Mill, Orsett Bata Factory Belmont Castle Coalhouse Fort The Dell High House, Purfleet Kings Head, West Tilbury Orsett Hall South Ockendon Windmill State Cinema Tilbury Fort